MASCOT® ACCELERATE
Winter Clothing
Face masks
Sustainable products
Sustainable profile
100% polyester
210 g/m²
Ripstop.The product is certified to retain its qualities with 50 domestic washes.Hydrostatic pressure test > 10,000 mmH²O according to EN ISO 811.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with like colours/textiles.
Wash temperature
Machine wash max 60ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Hang dry.
Zippers
Close any zippers before washing.
Ladies fit. Fluorescent and with oblique, transverse reflective strips. One-tone. Breathable, wind and waterproof. Taped seams. Padded. Quilt lining in sleeves. High collar with rib on the inner side. Detachable lined hood with adjustable drawstring. Adjustable wire on both sides of the hood. Fastening with zip and storm flap with press studs. Zipped pockets under storm flap. Zipped pocket under storm flap large enough to hold a 9.4-inch tablet. D-ring. Ergonomically shaped sleeves allow for high freedom of movement. Front pockets with zip. Internal drawstring adjustment at the hip. Zip at lower back for logo printing/ embroidery. Extended back. Rib (hidden in storm flap) and press stud fastening at cuffs.
The product is certified with maximum 0,0900m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.