Ripstop.Shrinkage max. 2%.The product is according to EN ISO 20471 certified to retain its qualities with 50 domestic washes.
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash gently < 40ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Close any zippers before washing.
Fluorescent and with reflective tapes. The fabric is highly durable, breathable, wind and waterproof. CLIMASCOT® Lightweight Insulation. Two-toned. Taped seams. Ergonomically formed trouser leg. Belt loops. Fly with zip. Front pockets. Back pockets with reinforcement and flaps. Hidden tool straps on both sides. Ruler pocket with Kevlar® reinforcement. Thigh pockets with flaps. Thigh pocket with lined phone pocket, magnet fastening and integrated ID card holder. Detachable ID card holder. Strong elastic detachable adjustables braces. The waistband is higher at the back, to better protect against the cold. Waist with elasticated sides. Adjustable kneepad pockets in durable CORDURA® (500 D). Snow flap on the inside of leg. Zip with storm flap on inside of lower legs. We recommend 00418-100, 00718-100, 50454-916 & 20118-915 kneepads for this model. Co-certified together with kneepad type SHORT or LONG in accordance with EN 14404.
You should choose a transfer that can be heated at a maximum of 145 degrees with consideration to print on the product. Remember to check the washing instructions for the chosen transfer before washing the product.
The product is certified with maximum 0,1900m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
No liability accepted for product alterations.