MASCOT® ACCELERATE
Workwear
Workwear for women
Sustainable products
Sustainable profile
65% polyester/35% cotton
290 g/m²
Twill.Do not soak.Wash separately.The product is certified to retain it qualities with 50 domestic washes or 50 industrial washes.The dirt-repellent Teflon® finish is reactivated by tumble drying according to the washing instructions.
Description
Industrial washing process for safety workwear and two-tone workwear.
Pro Label
Yes - if handled according to these care instructions.
Wash process
Wash according to ISO 15797 - 8A or 8B covering industrial wash. Wash separately.
Wash temperature
Max 75ºC.
Wash chemistry
Refer to info on reflective garments below.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Tumble dry (ISO 15797 8A): Max outlet / exhaust temp 90ºC, use cool down. And / or Tunnel dry: (ISO 15797 8B) Max incoming air temp 155/160ºC. Cycle time: balanced to meet residual moisture content of +3%.
Zippers
Close any zippers before washing.
Fluorescent and with vertical and chevroned crossed reflective strips. Two-toned. Teflon® makes the product dirt resistant. High collar. Double stitched seams on shoulders, sleeves and at the sides. Fastening with zip and storm flap with press studs. Extended back. Chest pocket with zip. Chest pocket with flap and press stud. D-ring. Ergonomically shaped sleeves allows high freedom of movement. Front pockets. Inner pockets. Ventilation under sleeves. Waist with press stud adjustment. Cuffs with press studs.
The product is certified with maximum 0,2000m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.