100% polyester (MASCOTEX®)
Do not soak.Wash separately.Do not use fabric softner.
Wash according to ISO 6330. Wash together with similar textiles/colours.
Wash gently < 40ºC.
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Clarify between local legislation and chemical supplier.
Close any zippers before washing.
Fluorescent with vertical and horizontal reflective tapes. Two-toned. Breathable, windproof and water-repellent. Inner collar of soft, durable material. Removable sleeves. Extended back. Fastening with zip, storm flap and hidden press studs. Zipped pocket under storm flap. Chest pockets with flap with hook and loop band fastening. Phone chest pocket with zip. D-ring. Pen pocket. Front pockets. Rib (hidden in storm flap) and press stud fastening at cuffs. Press stud adjustment at waist. Hood press studs. Quilt lining can zip out and be used separately - has ribbed collar and pockets. The lining is also a separate jacket that can be worn alone. The fluorescent jacket is approved to EN ISO 20471 and has vertical and horizontal reflectors. MASCOT® Loreto is a winter jacket certified to EN ISO 20471 - class 3, outer shell jacket certified to EN ISO 20471 - class 3, outer shell gilet certified to EN ISO 20471 - class 2, thermal jacket certified to EN ISO 20471 - class 3 and thermal gilet certified to EN ISO 20471 - class 1 all in one - perfect for all weather conditions. Supplement the product with a hood, MASCOT® MacCall (see MASCOT® COMPLETE).
The product is certified with maximum 0,0200m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Hi-Vis Group A/C. Certified to EN ISO 20471 - class 3. Without sleeves in accordance to EN ISO 20471 - class 2.
No liability accepted for product alterations.