MASCOT® ACCELERATE
Winter Clothing
Face masks
Sustainable products
Sustainable profile
100% polyester (MASCOTEX®)
240 g/m²
Do not soak.Wash separately.Do not use fabric softner.
Description
Domestic process.
Pro Label
No.
Wash process
Wash according to ISO 6330. Wash together with like colours/textiles.
Wash temperature
Wash gently < 40ºC.
Wash chemistry
Comply to chemical suppliers recommendations for specific textile categories. Avoid use of bleaching agents on coloured textiles. Avoid use of softeners.
Reflective garments
pH: Max pH 10, max alkalinity 650 mg/l. Do not use: Alkali boosters, optical brighteners, bleaching agents, detergents that contain free sodium or potassium hydroxide, solvenated surfectants. Avoid use of softeners. Max 20 min. in main wash bath.
Disinfection
Clarify between local legislation and chemical supplier.
Drying process
Hang dry.
Zippers
Close any zippers before washing.
Fluorescent with vertical and horizontal reflective tapes. Breathable, wind and waterproof. Taped seams. Double stitched seams on leg and crotch. Pile lining in body. Lining of quilt in legs and sleeves. Detachable lined hood with adjustable drawstring. Fastening with two way zip, storm flap and press studs. Chest pockets with flap with hook and loop band fastening. Phone chest pocket with zip. D-ring. Pen pocket. Front pockets with storm flap. Inner pocket - one with zip and one with hook and loop band. Stretch fabric hidden in back. Back pockets with reinforcement, flap and hook and loop band fastening. Thigh pocket with flap and hook and loop band fastening. Ruler pocket. Zip with storm flap on outerside of lower legs. Rib (hidden in storm flap) and press stud fastening at cuffs.
The product is certified with maximum 1,3300m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement:
No liability accepted for product alterations.