Fluorescent with vertical and horizontal reflective tapes. Two-toned. Anti-static, acid-protective and flame retardent. Breathable, wind and waterproof. Taped seams. Removable wadded lining. Fastening with two way zip, double storm flap and hidden press studs. Chest pockets with flap. Front pockets with flap. Drawstring at waist. Rib (hidden in storm flap) at cuffs. Elastic at cuffs. Hood press studs.

• Oeko-Tex standard 100 - Confidence in textiles. Tested for harmful substances.
• Protective clothing - Protection against rain Top digit: Resistance to water permeability. Class 1-3 (3 is highest class). Bottom digit: Water vapor permeability. Class 1-3 (3 is highest class).
• This standard describes the breakdown of electrostatic charges from the surface of the clothing materials.
• This standard describes the requirements for the materials and design of electrostatic dissipative protective clothing which is used as part of a grounded system to prevent incendiary discharges.
• Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals.
• Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing.
• High-visibility warning clothing for professional use X: Indicates product’s overall class, depending on the area of the fluorescent fabric and the area of reflective tape.
• High-visibility warning clothing for professional use X: Indicates product’s overall class, depending on the area of the fluorescent fabric and the area of reflective tape.
• Hi-vis Group A

• Oeko-Tex® Standard 100
• EN 343 3/1
• EN 1149-3:2004
• EN 1149-5:2008
• EN 13034
• EN ISO 14116
• EN ISO 20471 - class 2 (XS-S)
• EN ISO 20471 - class 3
• Hi-Vis Group A

Due to the fabric's special properties, logo transfer printing is only possible with transfer type Loxy LP 157 and LP 277. Please contact customer service for further information. If logo print is added to the clothing, avoid dry cleaning as this can damage the print.

The product is certified with maximum 0,0179 (M-4XL) 0,2099 (XS-S)m² logo area. This approved area must not be exceeded. Logo on, respectively, front or back of the product can constitute only a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.

Logo placement:

• Workwear logo. Special placement. Contact to discuss further