Wind and waterproof. Taped seams. Two-toned. Fluorescent, with oblique transverse reflective strips. ULTIMATE STRETCH. Anti-static, acid-protective and flame retardent. Protects from electric arcs. Padded lining. High collar. Quick release zipper closure and double storm flap. Strap for gas alarm. Chest pockets with zip. Prepared for attachment of ID card. Front pockets with a zip. Extra fabric at the lower back protects you from the weather. With print effects. The product has a surface treatment that is repellent and resistant to the permeation of sulfuric acid and sodium hydroxide in accordance with EN 13034 Type 6. Supplement the product with a hood, 21410-292 or 21510-292 (see MASCOT® COMPLETE).
OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
EN 1149-5 (tested according to EN 1149-3) - EN 1149-5 (tested according to EN 1149-3)
EN ISO 11612 - EN ISO 11612 (A1, B1, C1, E2, F1)
EN 13034 (Type 6) - EN 13034 (Type 6)
EN 342 3/WP - EN 342 3/WP (2.20 clo)
EN ISO 24232 4-1-X - EN ISO 24232 4-1-X
EN 61482-1-2 APC 2 - EN 61482-1-2 APC 2
EN IEC 61482-1-1 - EN IEC 61482-1-1 (ELIM 28,7 cal/cm², ATPV 28,7 cal/cm²)
EN ISO 20471 - class 3 - EN ISO 20471 - class 3
Hi-Vis Group A - Hi-Vis Group A
- OEKO-TEX® STANDARD 100
- EN 1149-5 (tested according to EN 1149-3)
- EN ISO 11612 (A1, B1, C1, E2, F1)
- EN 13034 (Type 6)
- EN 13034, category J
- EN 342 3/WP (2.20 clo)
- EN ISO 24232 4-1-X
- EN 61482-1-2 APC 2
- EN IEC 61482-1-1 (ELIM 28,7 cal/cm², ATPV 28,7 cal/cm²)
- EN ISO 20471 - class 3
- Hi-Vis Group A
Due to the unique properties of the fabric, logo printing is only available through the use of specific transfer types. As this is a safety product, we strongly recommend that MASCOT affix the logo to reduce the risk of errors. Please contact customer service for further information.
The product is certified with a maximum logo area of 0,1400m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
Man
No liability accepted for product alterations.