Two-toned. Fluorescent, with oblique transverse reflective strips. Anti-static, acid-protective and flame retardent. Protects from electric arcs. Stretch fabric on parts of the product. Prepared for holster pockets, attachable with the Click Pocket System. Fastening with zip and double storm flap. Chest pocket with a zip. Double stitched seams on the leg and crotch. Ergonomically formed trouser leg. Front pockets. Back pockets with reinforcement and flaps. Reinforced ruler pocket with flap. Thigh pocket with phone pocket and flap with hidden press stud and integrated ID card holder. Adjustable kneepad pockets with CORDURA fabric. Simple individual adjustment of kneepad pocket height. Elastic in the back. Each standard leg length can be lengthened by 3 cm by releasing the internal red stitching. With print effects.
OEKO-TEX® STANDARD 100 - OEKO-TEX® STANDARD 100
EN 1149-5 (tested according to EN 1149-3) - EN 1149-5 (tested according to EN 1149-3)
EN ISO 11612 - EN ISO 11612 (A1, A2, B1, C1, E1, F1)
EN 13034 (Type 6) - EN 13034 (Type 6)
EN 61482-1-2 APC 1 - EN 61482-1-2 APC 1 (torso, front and sleeves APC2)
EN IEC 61482-1-1 - EN IEC 61482-1-1 (ELIM 10 cal/cm², ATPV 11 cal/cm², stretch seat area and back ELIM 7,7 cal/cm², ATPV 9,5 cal/cm²)
EN ISO 20471 - class 3 - EN ISO 20471 - class 3
Hi-Vis Group Y - Hi-Vis Group Y
- OEKO-TEX® STANDARD 100
- EN 1149-5 (tested according to EN 1149-3)
- EN ISO 11612 (A1, A2, B1, C1, E1, F1)
- EN 13034 (Type 6)
- EN 61482-1-2 APC 1 (torso, front and sleeves APC2)
- EN IEC 61482-1-1 (ELIM 10 cal/cm², ATPV 11 cal/cm², stretch seat area and back ELIM 7,7 cal/cm², ATPV 9,5 cal/cm²)
- EN ISO 20471 - class 3
- Hi-Vis Group Y
Due to the unique properties of the fabric, logo printing is only available through the use of specific transfer types. As this is a safety product, we strongly recommend that MASCOT affix the logo to reduce the risk of errors. Please contact customer service for further information.
The product is certified with a maximum logo area of 0,5900m². This approved area must not be exceeded. Logos respectively on the front or back of the product, can only constitute a maximum of 50% of the total approved logo area in order to maintain the EN ISO 20471-certification. Note: The listed area is only a guide to how much space is available for logo placement. In order to maintain the product’s hi-vis class according to EN ISO 20471, the instructions on logo size must be observed.
Logo placement::
- Workwear logo. Special placement. Contact to discuss further
Man
No liability accepted for product alterations.